Official Support | ASUS Global.Connect the router’s LAN port to your PC’s LAN port with an Ethernet cable. Enter your router’s IP address in the browser of your device. Input your router’s username and password on the login page. ( When successfully logged in, you’ll see a screen similar as the one shown below.
How do I log into my router’s admin console?
Just follow these steps: STEP 1: Connect to your network. STEP 2: Launch a web browser on your device. STEP 3: Type 192.168. 1.254 in the browser’s address bar. STEP 4: Enter the router login username and password. STEP 5: You can change the router settings now!.
What is the default login for ASUS router?
Open your Internet browser, and input [http://192.168.1.1] into the address-bar then press [Enter]. Enter [admin] as the default user name and password, click [OK]. After login, press [Go] to start the setup.
How do I access my 192.168 1.1 router?
1.1 Default Router IP Address and Routers Using It.How to Login 192.168. 1.1? Turn on your router and connect it to your computer with an Ethernet cable. Open your favorite web browser and type “http://192.168.1.1” into the address bar. Enter the correct router login/password combination.
Why can’t I connect to my router admin page?
It’s probably because the router firewall is enabled and prevents the other devices to connect to it. In this case you have to reset the router (by pushing the reset button with a pin or power off then power on after about 15 seconds). When the router comes up, you can access the admin page only for about one minute.
How do I find my Asus router username and password without resetting it?
Look for your router’s default IP address – typically “192.168. 1.1” or “192.168. 0.1”. Click the “show passwords” button (should be on the screen somewhere) Look for the username and password.
How do I reset my Asus router admin password?
How to hard reset my ASUS router? Step 1: Press and hold the Reset button while the router is still powered on. Step 2: Connect your device to the wireless name “ASUS” & set up the network. Step 3: New Password. Step 4: New Wireless Setting. Step 5: Try connecting your device to the new network settings.
How do I log into my ASUS router if I forgot the password?
Note: If you forgot the username and/or password, please restore the router to the factory default status. Restore the system to its factory default settings by pressing the “Restore” or “Reset” button at the back of router for more than 5 seconds when the power light is flickering.
What is the 192.168 1.1 username and password?
The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).
How do I access my router admin without IP address?
Enter the router’s username and password in the login window. “Admin” is the most common default username. “Admin,” “Password” or a blank password are the most common default passwords. If your router uses something different, it should be listed in the router’s documentation.
How do I find my 192.168 IP address?
Select Command Prompt from the search results. In the black screen that comes up type in ipconfig/all and then Enter. You’ll see a screen like this. In this example, the IPv4 address is 192.168.
Can’t connect to ASUS router page?
[Wireless] Troubleshooting – I can’t login to ASUS Router WEB GUI via the username and the password Reset the router into factory default setting: Use the bundled network cable to connect your computer to your wireless router’s LAN port. If you successfully reset the router , you will see the following picture.
Why can’t I log into my router IP?
Check which network you’re connected to – Make sure that you’re connected to the right network and that your computer or phone hasn’t joined another network by mistake. Connect via a cable – If you’re using Wi-Fi, try and connect via a cable connection from a computer instead to see if you can.
How can I open my router settings?
Log in using a web browser Now that you have the router’s IP address, open any web browser and type (or paste) the IP address into the address bar. Your router’s login panel will then load within the browser window. If this is your first time, you’ll need the router’s default login credentials.
How do I restore my ASUS router to factory settings?
To do that, look for the Reset button on the back of your ASUS router or mesh Wi-Fi system. Use the Reset button on the back of your ASUS router. Log in to your ASUS router. In the ASUS firmware, go to Administration. Press the Restore button next to Factory default. Confirm that you want to continue with the reset.
How do I recover my router password without resetting it?
How to Find Router Username and Password (No Reset Required) Use the Router Password Kracker. Use RouterPassView. Look for the sticker at the back of your router. Use the router’s default name and password. How to forward ports without knowing the password.
What is the default username and password?
Default Router Username And Password List Router Brand Default Username 1 3Com admin 2 Belkin admin 3 BenQ admin 4 D-Link admin.