Access Router Command Line Interface Under Category, choose Session. Under Connection type, choose Serial. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable. Click Open.
How do I access my router through terminal?
On the Command Prompt window, enter “ipconfig” and press the [Enter]. The numbers indicated on the Default Gateway section is your router’s IP Address. If you want to access the router’s web-based setup page, enter the default gateway number in the URL or Address bar of your web browser.
How do you access the console on a Cisco switch?
To access the switch through the console (EIA/TIA-232) port, perform the steps in Table 2-1. Step 1 From the Cisco Systems Console prompt, press Return. Step 2 At the prompt, enter the system password. The Console> prompt appears indicating that you have accessed the CLI in normal mode.
What is console port in Cisco router?
Console Port Overview The console port on the router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is used to access the router and is located on the front panel of the Route Processor.
How do I access a wireless router using CMD?
Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter. That’s your router, and the number next to it is your router’s IP address.
How do I login to my Linksys router?
How to access the router’s web interface Launch a web browser and enter “192.168. 1.1” in the Address bar then press [Enter]. Enter your login credentials in the fields provided. The default password is admin. To know if you have successfully logged in to the web interface, the screen below should appear.
How do I access my Cisco router with an Ethernet cable?
Step 1 Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router. Figure 3-2 shows a Cisco 888W router connected to an Ethernet switch. Step 2 Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet connections.
How do I connect to my Cisco router?
Your Default Cisco Router Login Connect your device, either computer or mobile, to your internet. Open a web browser and enter the IP address of your router. The IP address used for most Cisco routers is 192.168. From the log-in page, enter your username and password. Hit the Ok button to access your web interface.
How do I use console port?
STEP BY STEP CONSOLE PORT CONNECTION Plug your console cable to the router or switch’s console port. Plug your console cable’s other side to your computer’s serial port. ( Open a connection software from your PC ( Like Putty , Secure CRT etc. ) Select “serial” connection and right COM port. ( Click connect.
How do you check console cable is working or not?
To test if the computer COM port is functioning correctly, you can do a simple loopback test. (In a loopback test, a signal is sent from a device and returned, or looped back, to the device.) For this test, connect a serial cable to the COM port that you want to test. Then short pin 2 and pin 3 of the cable together.
How do I connect my Cisco router to my laptop?
To connect your laptop to the console port on your router: Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop. Plug the Ethernet RJ-45 end of the console cable into the console port on the router.
How do I console a Cisco router using PuTTY?
1) After downloading PuTTY, connect the console cable with Cisco Router or Swtich, double click putty.exe to execute it. Expand Connection > Serial. Enter the port number inside “Serial line to connect to” text box. The port number is COM4 in below example.
How do I connect an Ethernet cable to a switch?
Connect a wired LAN adapter to the Nintendo Switch dock. Connect an Ethernet cable to the LAN adapter and then connect the other end of the Ethernet cable to your router or gateway. Place the Nintendo Switch console into the Nintendo Switch dock. Select “System Settings” on the HOME Menu of the Nintendo Switch console.
How use HyperTerminal with Cisco router and switch?
Run HyperTerminal in Windows by going to Start > Programs > Accessories > Communications > HyperTerminal. Centralized remote connection technologies, remote machine data, password management and access control on a platform that is secure, scalable and refreshingly simple to use.
How do I log into my 192.168 1.1 IP address?
192.168. 1.1 — What IP Address Is It?How to Login 192.168. 1.1? Turn on your router and connect it to your computer with an Ethernet cable. Open your favorite web browser and type “http://192.168.1.1” into the address bar. Enter the correct router login/password combination.
How do I login as admin on Wi-Fi?
Go to Internet > Change WiFi Settings > Other Settings. If you haven’t set a username and password yet, enter ‘admin’ and ‘password. ‘ Otherwise, use the ones you set. Tap Go to Admin Tool, then Advanced Settings.
Why can’t I connect to my router admin page?
It’s probably because the router firewall is enabled and prevents the other devices to connect to it. In this case you have to reset the router (by pushing the reset button with a pin or power off then power on after about 15 seconds). When the router comes up, you can access the admin page only for about one minute.
How do I log into my Linksys E2500 router?
The default IP Address of the Linksys E2500 is 192.168. The default password is admin and there is no username. IMPORTANT: If the router is configured using the Linksys Connect Software, the new wireless security key will also be the router’s password.
Why can’t I log into my Linksys router?
To resolve this issue, you can reset your router to factory default settings, uninstall and reinstall the Linksys Connect Software on your main computer, then reconfigure your router’s settings through Linksys Connect.
How do I connect my new router to my existing network?
Explore this article Extending the Network With Wi-Fi. Plug. Follow the wireless router’s. Disconnect the router’s. Move it to a position where it’s close enough to reach the existing LAN’s network switch or hub with the Ethernet cable. Connect one end of the Ethernet cable. Connect the other end of the Ethernet cable.
How do I connect my wireless router to my computer?
To connect a router to your computer with a wireless connection: Plug one end of an Ethernet cable into your modem. Plug the other end of the Ethernet cable into the Internet, Uplink, WAN or WLAN port on your router. Plug in your router and allow at least 2 to 3 minutes for it light up.
How do I connect two Cisco routers?
There are many ways to connect two routers back-to-back. 1: Connect through Ethernet ports: use a crossover cable to directly connect the routers together through two Ethernet ports. 2: Connect through serial ports: use a DCE/DTE cable to connect the serial ports.